Wombat Creek Tramways

Lately I have been tinkering around the two fibro houses. The ‘garden’ at the blue houses is mainly made up of grass – very long grass. The residents are not gardeners!
The grass is made with ‘teddy bear’ material from ‘Spotlight’, hairspray and a small and cheap spray bottle with diluted green acrylic paint. The result is not too bad – only a few clumps of grass. I still need to add a couple of gum trees, a garden shed, a Hill’s hoist and a few more ‘surprises’.

It is a bit hard to photograph the street side of the fibro houses, but with a mobile phone on ‘selfie setting’ it looks like this:

Since my last photo I have done a bit of weathering and ‘rust’ on the barn. The rolling stock is mainly made up of three Bachmann Brill trolleys. They have been bought on Ebay for a reasonable price. They aren’t really of Aussie design but not too far from the Adelaide H Class. But as you can see a new tram has arrived – a Melbourne W6 class. It is from Cooee and un-powered. I plan to scrap one of the Brills to motorise the W6. It doesn’t sound too difficult but apparantly it is not straight forward to dismantle the W6. I’ll keep you informed.

The barn is almost finished and up and running. Compared to the original
there is a few adaptations and compromises (sounds better than
‘mistakes’). The barn needs bit of weathering to remove the shine of
the corrugated iron panels. Rust will be added to show some ageing.

(Large photo)

(Large photo)

A couple of pics to show
the progress with the tram barn. Putting the rafters together was a
bit ‘fiddly’ but I think, they came up all right.

(Large photo)

I have no idea how the
double-decker tram turned up in Wombat Creek. The only Australian
city with double-deckers was Hobart, but they didn’t look like this
one. Well, the tram is used to make sure, it is possible to run a
double-decker tram into the middle road of the barn.

(Large photo)

2 weeks of holidays enables me to start on a major project at Wombat Creek Tramways. This time it is the long waited tram barn at the depot. The ‘foundations’ and the floor were put in place a long time ago. Now I have the time and materials to erect the building.

(Large photo)

The model is inspired by the former Victorian Railways’ tram depot in Elwood. Between 1906 and 1959 VR operated a broad gauge tram line between St. Kilda railway station and Brighton Beach railway station (VR also ran standard gauge trams between Sandringham to Black Rock and Beaumaris). In March 1907 a fire destroyed the barn and the entire fleet, but both the barn and the fleet were rebuilt later the same year. To read more about the Victorian Railways’ tram lines go to http://www.hawthorntramdepot.org.au/papers/vrtram.htm

The new barn in Elwood was clad in corrugated iron and featured some very distinctive inward leaning windows, which will be the main feature of my model.

(Archive: Melbourne Tram Museum)

In real life you will attach the wall to the already placed posts and beams, but I have taken a different approach. I have put the walls together, cut out openings for the windows and attached the posts and beams to the finished wall. Instead of working from the inside and out, I have worked from the outside and in!

(Large photo)

All the posts are slightly longer than the walls allowing them to stick into pre-drilled holes in the foundation. Which allows me to move the building from the layout – giving me easy access to the building itself and the interior.

So far walls and windows are finished. Since the ends of the barn will be quite open for glances of the interior I have modelled the window frames on both sides with the help of a white paint marker straight onto clear plastic. It works quite well.

(Large photo)
(Large photo)

Next step is the rafters and the roof. This time I will do it the ‘proper’ way around – first getting the rafters up and later lay the roof.

What has happened to the fibro houses? Well, literally the are both in the shadow of the barn! But both houses are progressing well. Whilst I am waiting for paint or glue to dry on the barn I work on the houses. They are both under roof and just need gutters, downpipes and supports under the carports.

The construction of the fibro houses is slowly progressing. One of the features of the houses is the rather larger windows allowing a lot of light into the interior. Unfortunately the windows also allow you to have a good squeeze into the houses!

I usually don’t model the interior of the buildings with the exception of shop windows, which are fully decorated. In the case of the fibro houses I find it necessary to put up wall paper in the lounge rooms and hall ways.

So I have been on the internet to find good pictures of 1960’s designed wall paper, curtains and doors, They have all been through Photoshop before being printer on ordinary paper. The outcome is visible in the photo.

(Large photo)

The
photo shows the slow progress on the fibro houses. The walls have
been painted in colours close to the ones in the add. The green is a
little darker, though. The window frames are cut from a white 0.4 mm
styrene sheet.

(Large photo)

Two
new houses are been constructed along the East Street. The are
designed as ‘fibro-houses’, which later will infamously known for the
use of asbestos cement as a wall material. I have adapted the history
behind the designs from the following website:
http://architecturebulletin.com.au/autumn-2015/a-home-for-every-taste-the-nsw-small-homes-service/

The
Small Homes Service was instigated in Victoria by Robin Boyd and The
Age newspaper in 1947 and later introduced in NSW. The Sydney Morning
Herald and Home Beautiful lobbied to establish a service along
similar lines to that established in Victoria. In New South Wales
building costs had doubled between 1939 and 1946 and building
materials were very hard to get. There was up to a two-year wait for
bricks in some areas with no brickworks.

In
September 1952, designs from the Victorian service were published in
the Sun Herald. The aim was to raise the standard of home design.
Designs were in brick (S/B), brick veneer (S/BV) and timber (S/T).
The total number of designs in September 1956 was about 40.

It
was among the timber house series that the more modern designs could
be found. Despite considerable effort by Bunning to promote modern
architecture the public seemed to prefer the more conservative
designs.

While
the New South Wales service overall may not have been viewed as a
success, the regular publishing of designs had an impact. The
combined living-dining area ‒ initially the result of the need, in
the late forties and early fifties, to plan houses in a compact
manner to meet official size restrictions ‒ became widely accepted.
Living areas opened onto paved terraces. Designs contributed to the
idea of informal living for which Australia is now known
internationally.

The
designs of the two houses in Wombat Creek are S/T 632 and S/T 663. I
found the designs on a website from
https://sydneylivingmuseums.com.au/post-war-sydney-home-plans-1945-1959
.
The picture shows an original advertisement from 1956. The designs
may be compact but they still take up a fair part of the to ‘blocks
of land’ next the tramway depot.

Instead
of using the infamous fibre-cement ‘Durabestos’ I will use cardboard
as the main building material. I will try to keep to the colour
scheme as seen in the advertisement. So far the walls have been cut
and glued together. Next steps are to glue thin strips of paper over
the ‘gaps’ along the walls and to apply some coats of paints.

(Large photo)